• .

  • .

  • .

  • .

Copyright 2020 - The Laserworld Group

The RTI PIKO RYGB 31 OPSL is a compact show laser system 'Made in Germany' in a durable, dustproof built housing, which is perfectly suitable for challenging show laser applications.


  • 31 W total RYGB power in a small housing of only 250 x 411 x 265 mm
  • increased to 8 W red for an even better white balance
  • very low divergence, thus very good visible even from longer distance
  • 31'000 mW guaranteed output power after optics
  • despite the high power it is possible to reach a maximum scan speed of 45 kpps@8° ILDA
  • high-precision diode arrays (blue, red) provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • green Coherent Taipan OPSL module, which stands out due to beam precision and 10'000 mW power
  • yellow Coherent Taipan OPSL module, which stands out due to beam precision and 6'000 mW power
  • novel method for increasing the power density of the red laser beam
  • brilliant colors and great color fading
  • the RTI PIKO RYGB 31 OPSL impresses with a very bright 638 nm red with 8 W power for an improved white balance
  • Dual blue laser diode module for more color nuances and higher visibility (6'000 mW / 450 nm & 4'000 mW / 462 nm)
  • newly developed electronics with calibration capability via a browser interface
  • Robust and dustproof housing, which also makes it possible to use it outdoors without problems

 This laser system not only impresses by a guaranteed RGB output power of 31'000 mW but also by its five color channels, which enable a broader color spectrum. The broader color spectrum makes the RTI PIKO RYGB 31 OPSL ideal for graphics projections.
8'000 mW at 638 nm red provide a powerful red chroma, while the combination of two different blue diode laser modules (6'000 mW / 450 nm & 4'000 mW / 462 nm) enable more color shades and a higher visibility. The red and blue diode laser modules are fabricated by Ray Technologies in Germany. For the yellow & green laser sources Coherent Taipan OPSL module are used, which stand out due to beam precision and 10 W (green) / 6 W (yellow).

The delivery includes an additional adapter to use even a 3 channel software.

The RTI PIKO RYGB 31 OPSL comes with fast scanners. The scan speed of 45 kpps@8° ILDA and a maximum scan angle of 50° (@30 kpps) make the system suitable for any kind of application.


Easily connect to the RTI PIKO laser with PC, MAC, tablet or mobile phone over LAN and adjust color balance, scanner position and scanning size, safety features and more. Laser configuration made easy - even if the system is mounted and not physically accessible any more.

By default, the RTI PIKO RYGB 31 OPSL is controlled via ILDA and is equipped with a newly developed electronics with calibration capability via a browser interface. In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser directly via LAN (W-LAN is also possible with a suitable access point). Thanks to the browser interface, it is no longer necessary to operate the laser projector directly on the device (since this is often mounted at a height of several meters). All configurations can be conveniently done via a computer (PC, MAC, Linux), a tablet or a mobile phone.
Optionally the system can also be operated via LAN, DMX, SD card or in auto mode. W-DMX and a remote control pad are available on request. On the back of the device, there is an 'ILDA-IN' interface as well as an 'ILDA-Through' to loop through the control signal. The emergency stop signal can also be looped through for several RTI NANO laser systems, which means that only one emergency stop is sufficient for all RTI NANO devices connected to one another.

Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The very powerful RTI PIKO RYGB 31 OPSL is well-suited for show laser applications in indoor as well in outdoor areas, at concerts, festivals and other large events. Graphics projections and long distance projections are easily possible.

The RTI PIKO RYGB 31 OPSL is a quality product manufactured in Germany.


  • CT-6210H scanner upgrade
  • RTI Remote Pad
  • RTI GOBO Wheel compact
  • Double Grating
Ray Technologies
Guaranteed Power After Optics:
31'000 mW
Power Red:
8'000 mW / 638 nm
Power Green:
10'000 mW / 530 nm (OPSL)
Power Blue:
6'000 mW / 450 nm
Power Cyan:
4'000 mW / 462 nm
Power Yellow:
6'000 mW / 577 nm (OPSL)
Laser Class:
Beam Specifications (full angle):
ca. 4.5 mm / <1.0 mrad
45kpps ILDA 8°
optional CT-6210H with LAS Turboscan: 60 kpps ILDA 8°; max. 60° (@35 kpps).
Scan Angle:
max. 50°
Laser Source:
Diode, Coherent Taipan OPSL
Operation Modes:
ILDA; optional DMX, Auto, LAN, SD-card, W-DMX
Browser interface (integrated), manual, power cable, 3-channel-adapter; optional: detachable remote control pad
Power Supply:
85-250 V AC 50/60 Hz
Power Consumption:
500 W
250 x 411 x 265 mm
Product Weight:
20 kg

Distributed Brand Laserworld Distributed Brand tarm distributed brand Ray Technologies
Showcontroller logo greyShoweditor laser show software Distributed Brand Garden Star Distributed Brand Pangolin Distributed Brand coherent 


Laserworld Ibérica en España Laserworld Ibérica em Portugal Laserworld en Mexico Laserworld India Laserworld 日本 Laserworld 배달 Laserworld w Polsce Laserworld Türkiye